EUSSO Launches the 8-port 10/100M SOHO Nway Switch, External Power, 5V. 0.6A ( Plastic Case ) 2008/11/25

The USH5008-XPE is a powerful, high performance, and high efficiency Fast Ethernet switching hub, with all 8 ports capable of 10 or 100M auto-negotiation operation (NWay) which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100M auto-sensing ability provides an easy way to migrate 10M to 100M networks with no pain.

Compared to the shared 10M or 100M networks, the NWay switch delivers a dedicated 10/100M connection to every attached client with no bandwidth congestion issue. Duplex mode also doubles the bandwidth by enabling two-ways communication.

Store-and-forward switching mode promises the low latency plus eliminates all the network errors, including runt and CRC error packets. To work under full-duplex mode, transmission and reception of the frames can occur simultaneously without causing collisions as well as double the network bandwidth.

The switch is plug-and-play without any software to configure and also fully compliant with all kinds of network protocols. Therefore, it makes the installation & network management easily and fast. Moreover, plenty of diagnostic LEDs provide the operating status of individual port and whole system. The Easy-to-tell LED indicators are the best helper of users to do real time diagnostic for your network.


  • Complies with IEEE802.3 & IEEE802.3u standards
  • 8 x RJ-45 ports for 100Base-TX and 10Base-T Ethernet connectivity
  • Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) detection
  • All ports with auto MDI-X function for switch-to -station and switch-to-switch connection with non crossover cable
  • Supports full and half duplex operation on all ports
  • Operates at maximum packet filtering & forwarding rate
  • Store and forward architecture filters fragment and CRC error packets
  • Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
  • Supports 1K MAC address entries in whole system
  • Supports 768K bites buffer memory
  • Wire-speed packet filtering and forwarding rate
  • Supports extensive LED indicators for network diagnostics
  • Mini size plastic case design