pic1
UPE5600-RTO

1-Port Outdoor PoE Repeater

Minimum Order Quantity : Negotiable
Are samples available for this product? : Negotiable
Current Export Markets : Worldwide

Language : English
Introduction

Introduction

UPE5600-RTO is a Power over Ethernet (PoE) Repeater that providing a 10/100Mbps Ethernet transmission for 100 meters distance and extend Ethernet connectivity another 100 meters with Power over Ethernet capability. It forwards both Ethernet and PoE for another 100 meter (330ft) using an innovative power-processing scheme and multiple units can be deployed in series for even longer distance with no degradation in network speed or latency.

UPE5600-RTO itself is powered by an Ethernet PoE Switch (or PoE Injector) and so requires no separate power connection in the middle of cable, making it extremely easy to connect. In the simplest application, a UPE5600-RTO allows an IP camera to be located 200 ~ 300 meters away from a PoE switch. The switch delivers PoE power over the first 100 meters of Cat. 5 cable to the UPE5600-RTO, and the UPE5600-RTO restores the Ethernet signal and forwards remaining PoE power to the camera. The UPE5600-RTO requires no local power supply, and the UPE5600-RTO presents no restriction to the camera network connection.

The advantage of PoE function of UPE5600-RTO is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5600-RTO can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.

Features

  • Complies with IEEE802.af Power over Ethernet (PoE)standard for voltage within 44 ~ 57 volt
  • Outdoor housing with IP65 industry standard for water resistance and dust-proof protection features
  • Complies with IEEE802.3u 100Base-TX standard
  • Complies with IEEE802.3 10Base-T standard
  • 1-port Ethernet Power Sourcing Equipment (PSE)
  • Extends Ethernet cable installation for another 100m
  • Forwards Power over Ethernet (PoE) to remote devices
  • Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) detection
  • Maximum Power Dissipation2.5 Watts
  • Supports auto MDI-X function for switch-to-station switch-to-switch connection with non crossover cable
  • Supports full and half duplex operation
  • Operates at max. packet filtering and forwarding rate
  • Store-and-Forward transmission method
  • Plug-&-Play without any software configuration
  • Transparent to all kind of network protocols
  • No power is required

Related Prodcuts