1-Port 30W High Power PoE Splitter

Minimum Order Quantity : Negotiable
Are samples available for this product? : Negotiable
Current Export Markets : Worldwide

Language : English


UPE5600-HST is a high power PoE Splitter for use in Power over Ethernet (PoE) systems. With Ethernet Input (data + power) port and Output (data only) port, UPE5600HST may split power from existing LAN cable and convert up to 12VDC/2A for power hungry applications such as Wireless Access Points (AP), Security Cameras and IP Phones. The internal current limit, short-circuit and overload protection are implemented to provide up to 12VDC/2A for use of DC output power. By using UPE5600-HST, both data and electrical power can be delivered to a non-PoE Ethernet –enabled devices from a single Cat.5 Ethernet cable.

UPE5600-HST can also work in pair with UPE5600-HIT (High Power PoE Injector) to deliver up to 12VDC/2A for use of high power devices such as 18W Security IP Cameras. UPE5600-HST itself is powered by UPE5600-HIT and so requires no separate power connection in the middle of the cable, making it extremely easy to connect and power IP cameras. UPE5600-HST terminal units complement any PoE injector unit or midspan switch to provide small to medium business setting a complete end-to-end PoE solution.

The advantage of PoE function is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5600-RT can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.


  • 12VDC 2 ~2.5A 30W High Power PoE Splitter
  • IEEE802.af Power over Ethernet (PoE) standard
  • Complies with IEEE802.3u 100Base-TX standard
  • Complies with IEEE802.3 10Base-T standard
  • 1 x RJ-45 PoE In port for both data + power
  • 1 x RJ-45 Ethernet Out port for data only
  • 1 x DC Output power jack for 12VDC (default) and
  • 9, 6, 5, or 3.3VDC (optional)
  • Delivers data and power for non-PoE Ethernet-enabled devices such as Wireless AP, IP Camera or IP Phone
  • Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) detection
  • Supports auto MDI-X function for switch-to-stationswitch-to-switch connection with non crossover cable
  • Easy-to-read LEDs provide instant operating feedback
  • Desktop size and wall mountable design
  • Plug-&-Play without any software configuration
  • Transparent to all kind of network protocols
  • No power is required

Related Prodcuts