Specifications

UCON301-I specifications :

• Serial1 interface :

  • *Connector type: DB9 male connector.

  • *Can be set to RS232/RS422/RS485 via DIP switch.

  • NOTE:Serial1 port is same signal ground with power adapter input.

• Serial2 interface:

  • *Connector type: DB9 male connector.

  • *Ground isolated RS422/RS485.

  • NOTE: RS422 or RS485 interface type set by DIP switch.

  • NOTE:Serial2 port is isolated signal ground with power adapter input.

  • NOTE: each port with 5 signal pin TX+ , TX- , RX+ , RX- , isolated GND

  • NOTE: In RS485 interface type support Auto-Data-Direction-Control feature. TX+ and RX+ short as Data+ signal , TX- and RX- short as Data- signal.

• Power input :

  • UP110/UP220 5V power adapter.

  • Current consumption: 300mA.

• LED indicator :

  • PWR: DC power input ON indicator.

  • Serial1: RS232/RS422/RS485 input port1 TXD/RXD signal activity.

  • Serial2: Isolated RS422/485 output port2 TXD/RXD signal activity.

• Dimension :92mm (W) * 118mm (L) * 27mm(H)

• Application :

  • RS232 to full duplex Ground isolated RS422 interface converter.

  • RS232 to half duplex Ground isolated RS485 interface converter.

  • RS422 to GROUND isolated RS422 repeater.

  • RS485 to GROUND isolated RS485 bridge.

  • RS422 to GROUND isolated RS485 interface converter.

• Performance upgrade capability and relative products.

  • TWIN485 box: two sets ground isolated RS232 to RS422/485 converter.

  • UTS112-I box: USB to two ground isolated RS232/422/485 ports converter.

  • ULOG301-I box: monitored universal RS232/RS422/RS485 to GROUND isolated RS422/RS485 interface converter via USB connection.

  • UP422I PCIPORT card: each card support two ground isolated RS422/485 ports.

  •  UP485I PCIPORT card: each card support four ground isolated RS422/485 ports.