Minimum Order Quantity : Negotiable
Are samples available for this product? : Negotiable
Current Export Markets : Worldwide

Language : English



IPMC-111PB++-60W is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber.  IPMC-111PB++-60W supports MDI/MDIX auto detection, so you don’t need to use crossover wires.  IPMC-111PB++-60W also support Power over Ethernet, a system to transmit electrical power up to 60 watts, along with data, to remote devices over standard 4-pair cable in an Ethernet network.  Each IPMC-111PB++-60W has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB++-60W with wide operating temperature range from -40 ~ 75℃ and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.

IPMC-111PB++-60W also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side.  Use the DIP-Switch to enable the LFP function, then IPMC-111PB++-60W will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation.  Therefore, the IPMC-111PB++-60W is reliable media converter with PoE capability and can satisfy most demand of operating environment.


  • Supports 1 port 10/100Base-T(X) P.S.E. auto-negotiation and auto-MDI/MDI-X
  • Support Ethernet to fiber or Ethernet to SFP port
  • Support LFP (Link Fault Pass-through) function
  • Supports full/half duplex operation
  • P.S.E. fully compliant with IEEE802.3at standard, provide up to 60Watts
  • Supports store and forward transmission
  • Provided DIP-Switch to setting function and PoE mode selectable
  • High reliability and rigid IP-30 housing
  • Ø DIN-Rail and wall mounting enabled

Related Prodcuts