Minimum Order Quantity : Negotiable
Are samples available for this product? : Negotiable
Current Export Markets : Worldwide

Language : English


ORing Media Converter ModelIPMC-111PB++-60W
Physical Ports 

10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX


100/1000Base-X SFP port

Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification

DIP Switch for function 
DIP-Switch setting

DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex

DIP Switch for PoE mode 
DIP Switch 1/2

DIP Switch 1/2 (OFF): PoE P.S.E set to master and Asyncronize mode.
DIP Switch 1/2 (ON) : PoE P.S.E set to syncronize mode(default)

LED Indicators 
Power indicator

Green : Power LED x 2 (ON : power input on-line / (OFF) power input off-line

10/100Base-T(X) RJ45 port indicator

Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) 10Mbps or Link down
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

100Base-FX fiber port indicator

Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

LFP statue indicator

Amber LED – (ON) LFP function fail / (OFF) LFP function disable

PoE indicator

Green for P.S.E. indicator

Input power

Dual 50~57 VDC voltage power inputs at 4-pin terminal block

Power consumption (Typ.)

3 Watts (Not include P.D's device)

Overload current protectionPresent
Reverse polarity protectionPresent
Physical Characteristic 
Dimension (W x D x H)

26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)

Weight (g)228 g
Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Temperature

-40 to 75°C (-40 to 167°F)

Operating Humidity5% to 95% Non-condensing
Regulatory approvals 

CE EMC (EN 55024, EN 55032), FCC Part 15 B


EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A


EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT),

IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))

Free FallIEC60068-2-32
Warranty5 years

 *Note1: (1) By default, the output value of the high power PoE++ is in Sync mode which supports PoE af/at-compliant P.D. devices.

(2) If you cannot enable the 60W PTZ camera, please set the DIP switch to Async mode and reconnect power. This mode only supports Dual P.D mode. You may not connect to an af/at-compliant P.D. device with this mode.

Related Prodcuts