|
GPS Module, GPS Module SiRF, GPS Engine, GPS Engine Board, GPS Receiver Module.Ct-30 is a high sensitivity, low power GPS engine board.It can be based on SiRFstar III GPS receiver module.12 or 20 channels "All-in-View" tracking, And its' Dimension: 30.6 x 26 x 7 mm
Features
- Dimensions: 30 x 26 x 7mm
- High-performance 20 channels GPS chipset
- With lithium battery
- Supports standard NMEA 0183 and SiRF binary protocol
- GPS I/O protocols: GGA, GLL, GSA, GSV, RMC and VTG
- Connector for GPS engine board: 180 degrees MMCX type
- Advanced trickle power mode for power saving
- IC voltage 3.3V
Specification
|
General |
| Frequency |
L1, 1575.42 MHz |
| C/A code |
1.023 MHz chip rate |
| Channels |
20 |
| Accuracy |
| Position |
10 meters, 2D RMS |
| 5 meters 2D RMS, WAAS corrected |
| <5meters (50%), DGPS corrected |
| Velocity |
0.1 meters/second |
| Time |
1 microsecond synchronized to GPS time |
| Datum |
| Default |
WGS-84 |
| Other |
selectable for other Datum |
| Time to First Fix (TTFF)(open sky & stationary requirements) |
| Reacquisition |
0.1 sec., average |
| Hot start |
8 sec., average typical TTFF |
| Warm start |
38 sec., average typical TTFF |
| Cold start |
42 sec., average typical TTFF |
| Dynamic Conditions |
| Altitude |
18,000 meters (60,000 feet) max. |
| Velocity |
515 meters/second (1000 knots) max. |
| Acceleration |
4g, max. |
| Jerk |
20 meters/sec.3 max. |
| Power |
| Main power |
3.3VDC input ~ 5.0 VDC input |
| Power consumption |
165 mW (continuous mode) |
| Supply Current |
49 mA |
| Backup Power |
1.65 ~ 5.0 VDC input |
| Serial Port |
| Electrical interface |
Two full duplex serial TTL or RS-232 level) |
| Protocol |
NMEA-0183@4800 bps (default) |
| NMEA output |
GGA,GLL,GSA,GSV,RMC,VTG (on customerrequest) Default |
| GGA, GSA, GSV, RMC (Baud Rate: 4800) |
| Time-1PPS Pulse |
Yes |
|